prasannas's blog

The term “Governing” means the action of varying the fuel supply in accordance with the load demand so that the engine runs at practically constant speed.
Below are the some important methods of governing of internal combustion engines.

01) Hit & Miss Governing-This method is suitable for small gas engines. In this, the rotational motion of the cam actuates the rocker through the roller. The

When sudden and violent knock are experienced in petrol engine, these knocks are termed as “Detonation”. Just like petrol engines, a high pressure wave set up in compression ignition engine (Diesel Engine) and this wave strikes the cylinder wall, cylinder head and piston resulting in knock. These knocks are known as “Diesel Knock”.

There is power and efficiency loss along with rough running of engine is observed due to diesel knock. In severe cases it may wreck the engine.

For the better knowledge of internal combustion engine every one must know about the following terms,

01) Carburetion:-The process of breaking up the fuel into minute particles and mixing it with air is called “Carburetion”. This process is mostly used in the internal combustion engine, which have low compression ratio and which use highly volatile liquid fuels such as petrol. The process of breaking up fuel in minute particles is known as “Atomization”. Carburettor is the device where all the carburetion takes place.

Various strokes are performed in internal combustion engine to get work done up to our requirement. To complete suction and exhaust stroke, there are
some valves used which are known as suction valve and exhaust valve. Suction valve allow the fresh charge of air-fuel mixture inside the cylinder, where
it is compressed and burnt by other parts. Due to combustion process large heat is developed and it makes exhaust valve very hot as burnt gases are escape
from this valve to atmosphere.

In an internal combustion engine cylinder sometime sudden and violent knocks are experienced, this is known as “Detonation”. This knock is set up by a
high pressure wave giving loud pulsating noise as it strikes against cylinder walls, cylinder head and piston.

A mild detonation will simply heat the engine but if the detonation is severe, it may even result in fracture of the piston or other damages to the engine.

Are you interested to boost traffic to your blog? Yes, then write more and more articles. This is the only thing, which will help us in pulling traffic from search
engine and building a brand of blog. How to write fast, is the most difficult task every blogger face.

Our online money earning will highly depend upon how much traffic we attract to our blog? “More the traffic=More the revenue” and “More the content=More the reader”. This is the simple formula of online success, are you agree with me?

I assume, title of post doesn’t surprise you. Every day thousands of readers is visited to forums to find out useful information. You can pull some of the
traffic from forums. How? Just find it from below.

01) Find Out Forums Related To Your Niche:-
For every niche there are forums online related to it. Just find it out by searching; many google AdSense revenue sharing sites have their own forums.
Search for 3 to 4 good forums related to your niche. It is not necessary to select only big forums, just confirm the forums you have selected are active.

Internal combustion Engine can be cooled by air cooling or water cooling method. Various Water Cooling methods of I.C. Engine are covered in earlier post, which you can refer to know in details. Impeller Thermosyphon system has required following components to perform the cooling action.

To pass some of the heat generated due to combustion in the cylinder of internal combustion engine, air cooling or water cooling methods are used. The
details about air cooling were covered in previous post (How To Cool Motor Cycle Engine?). In this post you will find some more methods of water cooling.

In water cooling method, the advantage of superior convective and conductive properties of water is used. Water is circulated continuously through the

Every blogger is interested in increasing traffic towards their blog. It is pleasing to see a decent number of visitors are visiting to our blog. When blog is new,it is somewhat difficult to attract more readers. Many blogger loose their patience and stop blogging. here they miss many chances of fame and making money. Actually, it is not too hard to pull traffic, if make our blog more attractive by someway. Here, I tried to put some techniques, which I think most useful.

01) Give a Personal Touch to Your Blog:-